Filter
Top Products
TANDBERG 3G Gateway Data port Command Interface User Guide
• Authentication Mode configures the use of authentication against a gatekeeper.
• Authentication ID Configures the user name used within an authentication challenge
• Authentication Password sets the password used within the authentication process.
NOTE! Authentication Password is write only.
Example of H323Gatekeeper feedback:
Xconf H323Gatekeeper Authentication
*c xConfiguration H323Gatekeeper Authentication Address: “abc.def.ghi.jkl”
*c xConfiguration H323Gatekeeper Authentication Mode: Off
*c xConfiguration H323Gatekeeper Authentication ID: ""
HTTP
Enables or disables access to HTTP services.
NOTE! Changes become effective after reboot.
HTTP Mode <On/Off>
Example of HTTP feedback:
*c xConfiguration HTTP Mode: On
HTTPS
Enables or disables access to HTTPS services.
NOTE! Changes become effective after reboot. Without https no web GUI is available.
HTTPS Mode <On/Off>
Example of HTTPS feedback:
*c xConfiguration HTTPS Mode: Off
IP
Configures the LAN interfaces when static IP address allocation is used.
NOTE! The 3G Gateway needs to reboot before the changes will take effect.
IP Assignment: <DHCP/Static>
or
IP Address <IPAddr>
or
IP Address Subnetmask <Subnetmask>
or
IP Address Gateway <IPAddr>
or
IP Address DNS Server [1..5] Address <IPAddr>
or
IP Address DNS Domain Name <S: 0, 64>
---
parameters:
• DNS Server: Number identifying one of 5 DNS servers which can be configured. If this
parameter is omitted the command applies to the first configuration (1).
sub-commands:
• Assignment: Selects between DHCP (Dynamic Host Configuration Protocol) or static
IP address allocation. When DHCP is selected the 3G Gateway will automatically
receive all the necessary information from the DHCP server. This function should be
D1320203 15