Filter
Top Products
TANDBERG 3G Gateway Data port Command Interface User Guide
*r Result (status=OK):
ID: 2
*r/end
OK
OptionKeyAdd
Command used to set new option keys.
Parameters:
• Key(r): <S: 0, 90> option key
NOTE! Always reboot the system after adding option keys, for the option key to take effect.
Example:
Xcommand OptionKeyAdd 115201P1-1-6A96DAA4
*r Result (status=OK): /
*r/end
OK
OptionKeyDelete
Command used to delete option keys.
Parameters:
• Key(r): <S: 0, 90> option key
Example (Delete Option Key nr. 1):
xCommand OptionKeyDelete 1
*r Result (status=OK): /
*r/end
OK
ServiceEntryDelete
Command used to delete services from the 3G Gateway.
Parameters:
• ServiceEntryNumber(r): <1..100>
Example (Delete Service nr. 10):
xCommand ServiceEntryDelete 10
*r Result (status=OK): /
*r/end
OK
ServiceEntrySwap
Command used to swap service numbers.
Parameters:
• ServiceEntryNumber(r): <1..100>
• ServiceEntryNumber2(r): <1..100>
Example (Swap Service nr. 10 & 11):
xCommand ServiceEntrySwap ServiceEntryNumber: 10 ServiceEntryNumber2: 11
D1320203 36