Filter
Top Products
TANDBERG 3G Gateway Data port Command Interface User Guide
4.2.5. Special (Xcommand) Commands
Command: Description:
Boot
Reboots the system.
Example:
xCommand Boot
*r Result (status=OK): /
*r/end
OK
CUIL reboot request, restarting
CheckDisk
This command shows the presence and the status of the internal harddisk.
Example:
xCommand CheckDisk
*r Result (status=OK):
CheckDisk: "Disk present"
CheckDisk: "Disk mounted"
CheckDisk: "Can read and write file on disk"
*r/end
OK
ClearDialplanEntries
This command deletes all dial plans.
Example:
xCommand ClearDialplanEntries
*r Result (status=OK):
*r/end
OK
DefaultValuesSet
This command is used to restore factory default settings. Issuing this command with no parameters
will restore all settings except network settings and option keys.
DefaultValuesSet Level: <1 .. 3>
Example (restore all default factory setting):
xCommand DefaultValuesSet
*r Result (status=OK): /
*r/end
OK
Dial
This command establishes a dial out to an end point
Parameters:
• CalledParty: <S:0, 60> End point to be connected with the service.
D1320203 33