Filter
Top Products
TANDBERG 3G Gateway Data port Command Interface User Guide
*c xConfiguration ISDN InternationalPrefix: "00"
Loadlimit
Sets the processor-load percentage at which calls should be routed to another 3G Gateway.
LoadLimit: <0..100>
Example of Loadlimit feedback:
*c xConfiguration LoadLimit: 85
Session
Sets a timeout time for sessions like telnet, ssh etc.
Session TimeOut: <0..65535>
Example of Session feedback:
*c xConfiguration Session TimeOut: 10000
SIP
Configures the SIP Proxy Mode and Address settings.
SIP Mode: <On/Off>
or
SIP Interface Server Address <S: 0, 255>
or
SIP Interface Server Type: <Auto/NortelMicrosoft/Cisco/Alcatel/Experimental>
or
SIP Interface Transport Default: <TCP/UDP/TLS>
---
sub-commands:
• Mode: Specifies whether the system uses a default SIP proxy.
• Address: Specifies the IPv4 address or FQDN of the SIP proxy.
• Type: Specifies the type of the SIP proxy.
• Transport Default: Determines which transport type will be used for SIP calls to and
from the traversal server.
Example of SIP feedback:
*c xConfiguration SIP Mode: On
*c xConfiguration SIP Interface Server Address: "127.0.0.1"
*c xConfiguration SIP Interface Server Type: Auto
*c xConfiguration SIP Interface Transport Default: UDP
SNMP
Configures the SNMP.
Note! For more information about SNMP please read the TANDBERG SNMP application note.
SNMP Mode < On/Off/ReadOnly/TrapsOnly >
or
SNMP CommunityName: <S: 0, 16>
or
SNMP SystemContact: <S: 0, 70>
or
SNMP SystemLocation: <S: 0, 70>
or
D1320203 17