Filter
Top Products
TANDBERG 3G Gateway Data port Command Interface User Guide
4.2.1. System Configuration Commands
Command: Description:
Dialplan
Mapping of a call onto a service or another call.
Dialplan Entry [1..64] Enabled: <On/Off>
Dialplan Entry [1..64] Name: <S: 0, 30>
Dialplan Entry [1..64] NetType: <All/H324m/H323/SIP>
Dialplan Entry [1..64] Prefix: <S: 0, 128>
Dialplan Entry [1..64] Suffix: <S: 0, 64>
Dialplan Entry [1..64] ServiceId: <0..64>
Dialplan Entry [1..64] Property [1..16] Name: <S: 0, 32>
Dialplan Entry [1..64] Property [1..16] Value: <S: 0, 64>
Dialplan Entry [1..64] Source [1..8] ID: < 0, 65535>
Dialplan Entry [1..64] Source [1..8] Path: <S: 0, 128>
sub-commands:
Each dial plan has the following general fields, i.e. Dialplan entry details:
• Enabled – If the box is checked the service becomes available.
• Name – The name of the dial plan as represented in the Dialplan Configuration
overview.
• Net type – Inbound call net type; either H324m, H323, SIP or All. All means that
independent of the net type the call is accepted on a match with the
predefined Prefix and Suffix.
• Prefix - Number to which the first part of the inbound number (bnr) is matched. The
prefix
is specified in the dial plan entry. The prefix is stripped from the inbound
number.
• Suffix - Number to which the last part of the inbound number (bnr) is matched. The
suffix
is specified in the dial plan entry. The suffix is also stripped from the inbound
number. The part of the number which remains after stripping both prefix and
suffix is called remainder (See also the “useremainder” option in a DID service).
• ServiceId – Select one of the services as configured in the Services menu item.
Each dial plan has the following service specific fields:
• Property – User configurable arguments used within a service.
• Source – User configurable figures and movies used within the service.
Argument details for the default DID service:
For a dial plan based on a DID service the following Arguments, i.e. properties, can be
D1320203 9