Filter
Top Products
TANDBERG Gatekeeper/Border Controller API User Guide
D14172.01 page 41 of 84
Gatekeeper Downspeed PerCall Mode: <On/Off>
Determines whether or not the system will attempt to downspeed a call if there is insufficient
per-call bandwidth available to fulfill the request. On: the system will attempt to place the call
at a lower bandwidth. Off: the call will be rejected.
Gatekeeper Downspeed Total Mode: <On/Off>
Determines whether or not the system will attempt to downspeed a call if there is insufficient
total bandwidth available to fulfill the request. On: the system will attempt to place the call at
a lower bandwidth. Off: the call will be rejected.
Gatekeeper Unregistered Caller Mode: <On/Off>
Specifies whether the system will accept incoming calls from endpoints that are not
registered to any other system.
Gatekeeper Unregistered Caller Fallback: <S: 0, 60>
Specifies the alias to which incoming calls are placed for calls where the IP Address or
domain name of the system has been given but no callee alias has been specified.
Gatekeeper Transform [1..200] Pattern: <S: 0, 60>
Specifies the pattern against which the alias is compared.
Gatekeeper Transform [1..200] Priority: <0..65534>
Assigns a priority to the specified transform. Transforms are applied in order of priority, and
the priority must be unique for each transform.
Gatekeeper Transform [1..200] Type: <Prefix/Suffix/Regex>
Determines the way in which the string must match the alias. Prefix: the string must appear
at the beginning of the alias. Suffix: the string must appear at the end of the alias. Regex: the
string will be treated as a regular expression.
Gatekeeper Transform [1..200] Behavior: <Strip/Replace>
Determines how the matched part of the alias will be modified. Strip: the matching prefix or
suffix will removed from the alias. Replace: the matching part of the alias will be substituted
with the text in the Replace string.
Gatekeeper Transform [1..200] Replace: <S: 0, 60>
(Applies only if pattern behavior is set to Replace.) Specifies the string to be used as a
substitution for the part of the alias that matched the pattern.
Traversal RetryInterval: <1..65534>
(Applies only if the system is a Gatekeeper.) Specifies the interval in seconds with which a
failed attempt to establish a connection to the traversal server should be retried.
Traversal AllowMediaDirect: <On/Off>
(Applies only if the system is a Gatekeeper.) Determines whether endpoints must route their
media through the Gatekeeper or may, if capable, send media directly to the Border
Controller.
Traversal UDPProbe RetryInterval: <1..65534>
(Applies only if the system is a Border Controller.) Sets the interval with which a failed
attempt to establish a UDP channel should be repeated.