Filter
Top Products
TANDBERG Gatekeeper/Border Controller API User Guide
D14172.01 page 54 of 84
Gatekeeper2Address: <S: 1, 128>
Specifies the IP Address or FQDN of the traversal server. Up to five alternate traversal
servers can also be specified.
Gatekeeper2Port: <1..65534>
(Applies only if the system is a Gatekeeper.) Specifies the port on the traversal server
to connect to.
Gatekeeper3Address: <S: 1, 128>
Specifies the IP Address or FQDN of the traversal server. Up to five alternate traversal
servers can also be specified.
Gatekeeper3Port: <1..65534>
(Applies only if the system is a Gatekeeper.) Specifies the port on the traversal server
to connect to.
Gatekeeper4Address: <S: 1, 128>
Specifies the IP Address or FQDN of the traversal server. Up to five alternate traversal
servers can also be specified.
Gatekeeper4Port: <1..65534>
(Applies only if the system is a Gatekeeper.) Specifies the port on the traversal server
to connect to.
Gatekeeper5Address: <S: 1, 128>
Specifies the IP Address or FQDN of the traversal server. Up to five alternate traversal
servers can also be specified.
Gatekeeper5Port: <1..65534>
(Applies only if the system is a Gatekeeper.) Specifies the port on the traversal server
to connect to.
Gatekeeper6Address: <S: 1, 128>
Specifies the IP Address or FQDN of the traversal server. Up to five alternate traversal
servers can also be specified.
Gatekeeper6Port: <1..65534>
(Applies only if the system is a Gatekeeper.) Specifies the port on the traversal server
to connect to.
HopCount: <1..255>
Specifies the hop count to be used when sending an alias search request to this zone.
Note: If the search request was received from another zone and already has a hop
count assigned, the lower of the two values will be used.
Match1Mode: <AlwaysMatch/PatternMatch/Disabled>
Determines if and when a query will be sent to this zone. Always: the zone will always
be queried. Pattern: the zone will only be queried if the alias queried for matches the
corresponding pattern. Disabled: the zone will never be queried.
Match1PatternString: <S: 0, 60>
(Applies only if the Match mode is Pattern Match.) Specifies the pattern against which
the alias is compared.
Match1PatternType: <Prefix/Suffix/Regex>
(Applies only if the Match mode is Pattern Match.) Determines the way in which the
string must match the alias. Prefix: the string must appear at the beginning of the
alias. Suffix: the string must appear at the end of the alias. Regex: the string will be
treated as a regular expression.
Match1PatternBehavior: <Strip/Leave/Replace>
(Applies only if the Match mode is Pattern Match.) Determines whether the matched
part of the alias should be modified before an LRQ is sent to this zone. Leave: the
alias will be unmodified. Strip: the matching prefix or suffix will be removed from the
alias. Replace: the matching part of the alias will be substituted with the text in the
Replace string.