Filter
Top Products
TANDBERG Gatekeeper/Border Controller API User Guide
D14172.01 page 82 of 84
Bandwidth
Bandwidth Call [1..900] SerialNumber: <String>
Shows the unique serial number of the call.
Bandwidth Call [1..900] State: <Unknown/Connecting/Connected/Disconnected
/ConnectionFailed/Parked/Parking/Unparking/ParkFailed>
Shows the state of the call.
Bandwidth Call [1..900] CallType: <Traversal/Direct/Routed>
Shows the type of the call.
Bandwidth Call [1..900] Transferable: <On/Off>
Shows whether this call is capable of being transferred.
Bandwidth Call [1..900] Bandwidth: <Integer>
Shows the updated bandwidth in kbps for the call.
Bandwidth Call [1..900] Route Zone: <String>
Shows the name of a zone that is part of the route the call takes.
Bandwidth Call [1..900] Route Link: <String>
Shows the name of a link that is part of the route the call takes.
Bandwidth Call [1..900] Leg [1..2] RegistrationID: <String>
Shows the registration ID of the call party if it is locally registered.
Bandwidth Call [1..900] Leg [1..2] SerialNumber: <String>
Shows the serial number of the call party registration. Only present if the call party is locally
registered.
Bandwidth Call [1..900] Leg [1..2] Alias [type = <IPAddress/E164/H323Id
/Email/Url/Prefix/Suffix>]
Shows the type of the call party alias.
Bandwidth Call [1..900] Leg [1..2] Alias: <String>
Shows the alias of the call party.
Bandwidth Call [1..900] Leg [1..2] Address: <String>
Shows the IP address and port of the call party.
Bandwidth Call [1..900] Leg [1..2] Encryption [status = <On/Off>]
Shows the status of encryption on the call leg.
Bandwidth Call [1..900] Leg [1..2] Encryption CheckCode: <String>
Shows the check code for the encrypted call leg. Only present if encryption status is On.
Bandwidth Call [1..900] StartTime: <String>
Shows the time at which the call was initiated.