Filter
Top Products
25
D13898.05
DECEMBER 2007
TANDBERG CONTENT SERVER
ADMINISTRATOR GUIDE
Table of
Contents
Disclaimers,
Patents etc.
Safety,
Environmental
Introduction Installation Quick Setup Operation
Backup and
Restoring
Administrator
Settings
Conference
Setup
View
Conferences
Appendices
Shutdown and Restart
Restarting the Content Server
System Status
Press 1. Enter to display the Main Menu
screen
From the 2. Main Menu screen, use the
Up or Down arrow to select Commands
Press 3. Enter to conrm your selection
From the 4. Commands menu, use the Up
or Down arrow to select Restart and
press Enter
You will be asked to conrm this 5.
action on the following screen. At the
Restart? prompt, use the Up or Down
arrow to select Yes and press Enter to
conrm.
The LCD panel display indicates the current status of the
Content Server.
In addition you will also nd the currently installed version, as
can be seen from the below menu structure.
Shutting Down the Content Server
Press 1. Enter to display the Main Menu
screen
From the 2. Main Menu screen, use the
Up or Down arrow to select Commands
Press Enter to conrm your selection3.
From the 4. Commands menu, use the Up
or Down arrow to select Shutdown and
press Enter
You will be asked to conrm this 5.
action on the following screen. At the
Shutdown? prompt, use the Up or
Down arrow to select Yes and press
Enter to conrm.
IMPORTANT6. —wait until is is safe to shut
down the Content Server and the LCD
panel displays Power off.
LCD panel display when a call is
currently in progress.
LCD panel display when no calls are
currently in progress.
LCD panel display when transcoding
is in progress.
Command Menu Structure
Restoring Default Settings
is described on the next
page.
IP Settings are treated in Installation.
Display information on the
version currently installed.
No Shutdown or Restart While Calls Are In Progress!
We do not recommend to shutdown or restart the
Content Server while calls are in progress. If the Content
Server is in a call and the server is restarted or shut
down, calls in progress will fail and will not be recorded.
!
How to use the front panel keys is explained on the next
page.
For details on how to restart the TCS service without
restarting the Content Server, see the Administrator
Settings section.
IP Settings
Commands
Ver sio n Info
Restart?
No
Ye s
Sh utd ow n?
No
Ye s
- Restore Defaults -
Full Restore
Config Restore
Full Restore?
No
Ye s
Config Restore?
No
Ye s