Filter
Top Products
40
D13898.06
MAY 2008
TANDBERG CONTENT SERVER
ADMINISTRATOR GUIDE
Table of
Contents
Introduction Installation Quick Setup
TCS
Administration
Backing up and
Restoring
Administrator
Settings
Conference
Setup
View
Conferences
Appendices
Site Settings
NAT Address. The NAT address must
be the global, external address to a
router with NAT support. In the router,
the following ports must be routed to
the system’s IP address:
Port 1720•
The port range specied by the•
Port Range eld, eg. 3230 to
3270.
Please contact your TANDBERG
representative or authorized reseller for
more information.
Use Static Ports is disabled by
default. This means that the system
will dynamically allocate which ports
to use when opening a TCP/UDP
connection.
Static ports can be enabled by
selecting the checkbox and specifying
the required range of ports.
Port Range. 3230 to 3270 is the
standard rewall port range. It needs
to be congured according to your
local rewall settings.
NAT. Network Address Translation is
used when the Server is connected to
a router with NAT support. The default
setting for NAT is Off.
If NAT is On, the system will signal
the congured NAT address in place
of its own IP address within Q.931
and H.245.
If NAT is set to Auto, the system will
try to determine whether the NAT
address or the real IP address should
be used for signaling. This is done
to make it possible to make calls
to endpoints on the LAN as well as
WAN.
Restart Service.(see Site Settings)
Restart Service will terminate calls
that are currently live (that is, the
calls will be ended and conferences
will not be available for on demand
playback).
Before restarting the service, check if
there are live conferences in progress
in the Live Conferences page or
check the call status on the LCD
panel of the unit. The Site Settings
page will also display a warning if
calls are in progress. If you click on
the Restart Service button while calls
are in progress, you will be asked to
conrm if you want to go ahead with
the restart.
The Advanced H.323 Settings
Changes to any elds in this
section require you to Restart
Service.