Filter
Top Products
41
D13898.06
MAY 2008
TANDBERG CONTENT SERVER
ADMINISTRATOR GUIDE
Table of
Contents
Introduction Installation Quick Setup
TCS
Administration
Backing up and
Restoring
Administrator
Settings
Conference
Setup
View
Conferences
Appendices
Site Settings
Status. Displays the status of Content Server’s
registration with the SIP registrar.
SIP enabled. Select to enable registration with
a SIP registrar.
Display name. Enter the Content Server’s SIP
display name.
SIP Address (URI). Other systems can call
the Content Server using the SIP Address
or URI (Uniform Resource Identier) if the
Content Server is registered to a SIP registrar.
The recording alias specied in the Default
Recording Aliases will be used for the call.
Server Discovery is Manual. The IP of the
Server must be entered below.
Server Address. Enter the IP address or a fully
qualied domain name of the SIP registrar.
Server Type. Select the type of SIP registrar.
The default setting is Auto, which supports
registering to standard SIP servers like
OpenSer.
Transport. Choose the transport protocol
for SIP. The default transport method is TCP
(Transmission Control Protocol). UDP (User
Datagram Protocol) can also be used.
User name. Enter the user name to
authenticate toward the SIP server.
Password. Enter the password to authenticate
toward the SIP server.
Password conrm. Re-enter the password.
SIP Settings
The clickable link View all SIP registrations link
to the SIP Alias Registration screen.
Status: Displays the status of Content Server
registration with the SIP registrar.
Registrations: Displays all Aliases that are
registered to the SIP registrar.