Filter
Top Products
83
-
5
15
-
0
00
Rev.
B
11
NOTES:
*1: Minimum voltage is guarantee
d to maximum 0.2% of the rated output voltage.
*2: Minimum cu
r
rent is guaranteed to maximum 0.4% of the rated output current.
*3: For cases where conformance to various safety standards (UL, IEC etc.) is required, to be
d
e
scribed as 190
-
240Vac (
50/60Hz)
for
3
-
Phase 200V models
and 380
~
415Vac (50/60Hz) for 3
-
Phase 400V mo
d
els.
*4: 3
-
Phase 200V models: at 200Vac input voltage
3
-
Phase 400V: at 380Vac input voltage. With rated output power.
*5: Not including EMI fil
t
er inrush cu
r
rent, less than
0.2mSec.
*6: 3
-
Phase 200V mo
d
els: 170
~
265Vac, constant load.
3
-
Phase 400V models: 342
-
460Vac, constant load.
*7: From No
-
load to Full
-
load, constant input voltage. Measured at the
sensing point in Remote
Sense.
*8: For 8V
~
300V models: measured with J
EITA RC
-
9131A (1:1) probe.
For 600V model: measured with 10:1 probe.
*9: From 10% to 90%
or 90%
to 10% of rated output voltage, with rated, resistive load.
*10: From 90% to 10% of rated output voltage.
*11: For load voltage change, equal to the unit v
oltage rating, constant input voltage.
*12: For 8V
~
1
6
V models the ripple is measured at 2V rated output voltage and rated output current.
For other models, the ripple is measured at 10
~
100% of rated output voltage and rated output
current.
*13: The constan
t C
urrent programming readback and monitoring accuracy does not include the
war
m
-
up a
nd load regulation thermal drift
.
2.12 SUPPLEMENTAL CHARACTERISTICS
The supplemental characteristics give typical but non
-
warranted performance characteristics. Th
e
supplemental characteristics are useful in a
s
sessing applications for the power supply. Several kinds
of supplemental characteristics are listed below.
1.
Evaluation Data: Typical performance of the power supply.
2.
Reliability Data: Reliability Performance of
the power supply.
3.
EN61000 Data: Performance of the power supply under EN61000 test conditions.
4.
EMI Data: Typical EMI (conducted and radiated) performance of the power su
p
ply.
The supplemental characteristics data is held in each
TDK
-
Lambda Americas Inc.
s
ales and service
facility. For further d
e
tails please contact the
TDK
-
Lambda Americas Inc.
office nearest you.