Filter
Top Products
83
-
5
15
-
0
00
Rev.
B
21
3.9.6
Making the load connections
8V to 100V Models
Ref
er to Fig.3
-
6 for connection of the load wires to the power supply bus
-
bars and to Fig.3
-
7 for
mounting the bus
-
bars shield to the chassis.
WARNING
Hazard
ous voltages may exist at the outputs and the load conne
c-
tions when using a power supply with a rated output greater than 40V.
To protect personnel against accidental contact with hazardous vol
t-
ages, ensure that the load and its connections have no accessi
ble live
parts. Ensure that the load wiring insulation rating is greater than or
equal to the maximum output voltage of the power supply.
CAUTION
Ensure that the load wiring mounting hardware does not short the ou
t
put
terminals. Heavy connec
ting cables must have some form of strain relief
to prevent loosening the connections or bending the bus
-
bars.