Filter
Top Products
Using a Password
You may set a password from the Setup Menu in
DOS. To set a password, complete the following
steps:
1.
Enter the Setup menu by pressing Ctrl-Alt-Esc.
2. From the Setup Menu, press Tab until you reach
the Password field.
3. Press the left or right arrow key.
A Modify Password box appears and prompts
you to type in a new password.
4.
Enter a new password of up to seven characters
and press
Enter.
You are asked to verify the password by
retyping it.
5.
Retype the password and press Enter.
The password is set to Enabled and you will be
prompted for the password every time you
reboot the system
. You have three tries to
enter the correct password on powerup before
the system halts and you have to shut down.
6. To save your changes, press Esc-F4.
Using a Password
5-9