Filter
Top Products
What You’ll Need
3
Installing the Evaluation Module and the C Source Debugger
Software checklist
operating system MS-DOS or PC-DOS (version 3.0 or later)
Optional: MS-Windows (version 3.0 or later)
software tools TMS320 floating-point family DSP (’C3x/’C4x) assembler and linker
Optional: TMS320C3x/C4x C compiler
required files
†
evmrst.exe resets the EVM
optional files
†
init.cmd is a file that contains debugger commands. The version of
this file that’s shipped with the debugger defines a ’C3x memory
map. If this file isn’t present when you invoke the debugger, then all
memory is invalid at first. When you first start using the EVM, this
memory map should be sufficient for your needs. Later, you may
want to define your own memory map. For information about setting
up your own memory map, refer to Chapter 5, Defining a Memory
Map, in the TMS320C3x C Source Debugger User’s Guide.
†
init.clr is a general-purpose screen configuration file. If this file isn’t
present when you invoke the debugger, the debugger uses the de-
fault screen configuration.
†
The default configuration is for color monitors; an additional file,
mono.clr, can be used for monochrome monitors. When you first
start to use the debugger, the default screen configuration should be
sufficient for your needs. Later, you may want to define your own
custom configuration.
For information about these files and about setting up your own
screen configuration, refer to Chapter 9, Customizing the Debugger
Display, in the TMS320C3x C Source Debugger User’s Guide.
†
Included as part of the debugger package