Filter
Top Products
Chapter 3
Internet Access in No Time
E-DOC-CTC-20050429-0061 v1.0
11
3 Internet Access in No Time
What you need from
your ISP
Following configuration parameters are provided by your ISP:
Your ISP’s connection service model (for example PPPoE)
VPI/VCI (for example 8/35)
Your user name and password to connect to the Internet
Internet connectivity
setup
There are different ways of setting up Internet connectivity on your SpeedTouch™.
The best way depends on your operating system.
Optionally your ISP may indicate the Service Profile to use in the
SpeedTouch™ Home Install Wizard or Easy Setup.
If you use following
operating system
the recommended way to setup your
SpeedTouch™ is
MS Windows (98 SE,
Millennium, 2000 or XP)
the Home Install Wizard, as described in
“3.1 SpeedTouch™ Home Install Wizard” on
page 12.
Mac OS X, provided you will
use a wired connection to your
SpeedTouch™
Any operating system
(provided you have IP
connectivity)
the Easy Setup, as described in “3.2 Web-Based
Easy Setup” on page 21: Open your web
browser, the SpeedTouch™ HTTP intercept will
do the rest.
Mac OS X, wirelessly
connected to your
SpeedTouch™
If you are using MS Windows XP, it is also be possible to use the MS
Windows XP Internet Gateway Device (IGD) Control Agent for UPnP, as
described in the SpeedTouch™ User’s Guide.