Filter
Top Products
Chapter 3
Internet Access in No Time
E-DOC-CTC-20050429-0061 v1.0
13
Connecting your
computer
The SpeedTouch™ Home Install Wizard will check your system and will invite you to
connect the SpeedTouch™ to your computer.
The next step will depend on the connection type you will use. In case of:
Wireless: Go to “3.1.1 Wireless Setup” on page 17.
USB: Go to “3.1.2 Installing USB drivers” on page 18.
Ethernet: After you have plugged in the Ethernet cable to both the computer
and the SpeedTouch™, proceed with “ Configuring the SpeedTouch™ (and your
computer)” on page 14.
If the wizard does not detect a connection, an error message will be
displayed. Refer to ”The wizard does not detect a connection” on page 32.