Technicolor - Thomson 580 Network Router User Manual


 
Chapter 3
Internet Access in No Time
E-DOC-CTC-20050429-0061 v1.0
18
3.1.2 Installing USB drivers
USB connection You may want to connect your computer to the SpeedTouch™ using the USB port.
To be able to do so, you must install the corresponding USB driver.
Supported operating
systems
USB connection on the SpeedTouch™ is supported for following
Microsoft Operating Systems:
MS Windows 98SE
MS Windows Millennium
MS Windows 2000
MS Windows XP
You may need the Windows installation CD during installation.
Mac Operating Systems:
Mac OS X 10.2 (Jaguar)
Mac OS X 10.3 (Panther)
Installing Windows USB
drivers
The first time you connect the SpeedTouch™ to your computer through a USB
interface, as soon as you plug the USB cable into the computer, you will be prompted
for a USB driver.
You will find the required USB driver software on the Setup CD, you just entered in
your computer’s CD-ROM or DVD-ROM drive. The installation is plug and play,
meaning that installation will require almost no effort.
Proceed as follows:
1 Insert the blue USB cable provided into the SpeedTouch™ USB port marked with
the USB logo.
2 The other end of the USB cable fits in (one of) the USB port(s) of your
computer. In most cases your computer's USB port is marked with the same
USB symbol.
3 Windows will automatically recognise the Thomson USB Remote NDIS device:
The installation procedure might be slightly different depending on the
MS Windows OS you are using.
An USB logo looks like this:
You can also connect your computer to the SpeedTouch™ via a USB
hub, provided that the hub is autonomously powered.