Filter
Top Products
Chapter 3
Internet Access in No Time
E-DOC-CTC-20050429-0061 v1.0
20
3.1.3 Connecting Multiple Computers
Multi-user When multiple computers are used with a single SpeedTouch™, you can run the
Home Install Wizard on each computer to ensure correct TCP/IP settings on the
computers to connect to the SpeedTouch™.
The Home Install Wizard will detect your SpeedTouch™ device and sense that the
SpeedTouch™ has already been configured. You will be given the choice to
reconfigure the SpeedTouch™ or not.
1 Select No, if you only want to configure the computer, and click Next.
2 Select Assign IP address automatically.
Click Next.
3 To close the wizard, click Finish.
For fixed IP configuration, proceed as follows:
1 Select Use these IP settings.
2 Enter the IP address and subnet mask off your computer and your
SpeedTouch™. Make sure they are in the same subnet.