Filter
Top Products
E-DOC-CTC-20061027-0003 v2.0
Connection Commands
92
connection describe
Describe the streams of a connection.
SYNTAX:
where:
EXAMPLE:
connection describe [id = <number{0-2048}>]
id A number between 0 and 2048.
Represents the ID of the connection to be
described.
Note If not specified, the connection with ID 0
will be described.
Tip Use the command :connection list
to obtain the IDs of the
different connections.
OPTIONAL
=>connection list
ID proto state substate flags timeout
-- ----- ----- -------- ----- -------
62 tcp ACTIVE [TCPS_ESTABLISHED-TCPS_ESTABLISHED] [......] 15' 8"
INIT: 124 192.168. 1. 64: 1979 192.168. 1.254: 23 [...] LocalNetwork 548 tcp 0
RESP: 125 192.168. 1.254: 23 192.168. 1. 64: 1979 [R..] loop 396 tcp 0
=>connection describe id=62
ID proto state substate flags timeout
-- ----- ----- -------- ----- -------
62 tcp ACTIVE [TCPS_ESTABLISHED-TCPS_ESTABLISHED] [......] 14' 59"
FW : cache = valid; FP
IDS : ...
NAT : cache = valid; No translation
INIT: 124 192.168. 1. 64: 1979 192.168. 1.254: 23 [...] LocalNetwork 576 tcp 0
ROUTING : cache = valid; FP (gateway 127.0.0.1)
LABEL : cache = valid; FP (no route label); FP (QoS label Interactive)
IPQOS : cache = valid; FP (label <no meter>, intf <no meter>)
TRIGGER : cache = valid; FP (no trigger)
RESP: 125 192.168. 1.254: 23 192.168. 1. 64: 1979 [R..] loop 412 tcp 0
ROUTING : cache = valid; FP (gateway 192.168.1.254)
LABEL : cache = valid; FP (no route label); FP (QoS label default)
IPQOS : cache = valid; FP (label <no meter>, intf <no meter>)
TRIGGER : cache = valid; FP (no trigger)
=>