Filter
Top Products
E-DOC-CTC-20061027-0003 v2.0
IPQoS Commands
474
ipqos config
Configure IPQoS for a given destination interface for the IPQoS queues instantiation.
SYNTAX:
where:
i
When enabling or disabling IPQoS, take the following into account:
> if the WAN interface (for example PPPoA, IP oA,...) is detached at the time of enabling/disabling
IPQoS, then the WAN interface has to be attached in order for the enabling/disabling of IPQoS to
take effect.
> if the WAN interface is attached at the time of enabling/disabling IPQoS, then the WAN interface
has to be detached and then re-attached in order for the enabling/disabling of IPQoS to take
effect.
ipqos config dest = <string>
[state = <{disabled | enabled}>]
[discard = <{tail | early}>]
[priority = <{wfq | strict | wrr}>]
[realtimerate = <number{1-100}>]
[burstsize = <number{1-128}>]
[weight1 = <number{1-97}>]
[weight2 = <number{1-97}>]
[weight3 = <number{1-97}>]
[weight4 = <number{1-97}>]
[maxpackets = <number{0-100}>]
[maxbytes = <number{0-128}>]
dest The destination interface for the IPQoS queues instantiation.
This is an ATM phonebook entry.
REQUIRED
state Disable or enable IPQoS for the interface.
The default is disabled.
OPTIONAL
discard Determines the packet discard strategy in case of congestion.
Choose between:
> tail: Tail Drop: arriving packets will be dropped as soon as the
destination queue is in an overflow state.
> early: Early Packet discard: arriving packets will be dropped early
according to the BLUE active queue management algorithm.
The default is early.
OPTIONAL