Filter
Top Products
E-DOC-CTC-20061027-0003 v2.0
DSD Commands
216
dsd intercept config
Display/modify the HTTP Intercept configuration.
SYNTAX:
where:
EXAMPLE:
dsd intercept config [WDSpoofedIP = <ip-address>]
[servertimeout = <number>]
[servererrorurl = <string>]
[categoryerrorurl = <string>]
[monitorintercepturl = <string>]
[urlblockedurl = <string>]
[imageredirect = <{disabled | enabled}>]
[imageredirecturl = <string>]
[alwaysuseip = <{disabled | enabled}>]
WDSpoofedIP The IP address indicating unavailable WAN connection.
The default is 198.18.1.1.
OPTIONAL
servertimeout A number of seconds.
Represents the server timeout for redirect action.
The default is 10.
OPTIONAL
servererrorurl The destination URL when the connection to the server failed. OPTIONAL
categoryerrorurl The destination URL when the connection to the category server
failed.
OPTIONAL
monitorintercept
url
The destination URL when the request is intercepted by the
monitor thread.
OPTIONAL
urlblockedurl The destination URL when the requested URL is blocked. OPTIONAL
imageredirect Enable or disable substitution of blocked images.
The default is enabled.
OPTIONAL
imageredirecturl The URL of the image used when substituting blocked images. OPTIONAL
alwaysuseip Always use IP address when redirecting to a local page (enabled)
or not (disabled).
The default is enabled.
OPTIONAL
=>dsd intercept config
WAN down spoofed IP : 198.18.1.1
Servertimeout : 10 sec
Connection failure : /cgi/b/ic/connect/
Category server error : /cgi/b/ic/connect/
Monitor intercept : /cgi/b/ic/connect/
Unauthorized request : /cgi/b/sfltr/blocked/
Image redirecting : enabled
Image redirect url : /images/spacer.gif
Always use IP : enabled
=>