Filter
Top Products
E-DOC-CTC-20061027-0003 v2.0
System Commands
676
system config
Set/change the system configuration parameters.
SYNTAX:
where:
!
For a good operation of UPnP and the discovery mechanism, it is highly recommended not to
change the system configuration settings.
system config [upnp = <{disabled | enabled}>]
[tr64 = <{disabled | enabled}>]
[mdap = <{disabled | enabled}>]
[drst = <{disabled | enabled}>]
[led = <{green | red | orange | flash | off}>]
[resetbutton = <{disabled | enabled}>]
[digestauth = <{disabled | enabled}>]
[defaultconnection = <string>]
[rtc = <{disabled|enabled}>]
[autosave = <{disabled | enabled}>]
[autosavedelay = <number{0-600}>]
upnp Enable or disable UPnP discovery.
The default is enabled.
OPTIONAL
tr64 Enable or disable TR-64 discovery.
The default is disabled.
OPTIONAL
mdap Enable or disable proprietary discovery protocol.
The default is enabled.
OPTIONAL
drst Enable or disable DrSpeedTouch access.
The default is disabled.
OPTIONAL
led Set the system LED colour.
Choose between:
> green: solid green
> red: solid red
> orange: solid orange
> flash: toggle between green and orange
> off: LED is off.
The default is green.
OPTIONAL
resetbutton Enable or disable reset-to-factory-defaults pushbutton.
The default is enabled.
OPTIONAL
digestauth Enable or disable HTTP digest authentication.
The default is enabled.
OPTIONAL
defaultconnection The name of the default internet connection. OPTIONAL
rtc Enable or disable RTC.
The default is disabled
OPTIONAL
autosave Enable or disable autosaves.
The default is enabled.
OPTIONAL