Filter
Top Products
E-DOC-CTC-20061027-0003 v2.0
IP Commands
436
ip config
Show/set global IP stack configuration options.
SYNTAX:
where:
ip config [forwarding = <{disabled | enabled}>]
[redirects = <{disabled | enabled}>]
[checkoptions = <{disabled|enabled|transparent}>]
[netbroadcasts = <{disabled | enabled}>]
[ttl = <number{0-255}>]
[defragmode = <{disabled | enabled}>]
[addrcheck = <{off | own | static | dynamic}>]
[mssclamping = <{disabled | enabled}>]
[natloopback = <{disabled|enabled}>]
[loadbalancing = <{disabled|roundrobin}>]
[bitrate-window(sec) = <number{10-3600}>]
[acceleration = <{disabled|enabled}>]
forwarding Disable or enable the IP routing functionality.
The default is enabled.
OPTIONAL
redirects Disable or enable the sending of ICMP redirect messages.
A router can send a redirect message in case a shorter path than the
path followed is discovered.
The default is enabled (for security reasons).
OPTIONAL
checkoptions Disallow/Allow packets with IP options.
The default is enabled.
OPTIONAL
netbroadcasts Disable or enable net directed broadcasts.
The default is disabled.
In case netbroadcasts are allowed, no traces of netbroadcasts are
generated.
OPTIONAL
ttl A number between 0 and 255.
Represents the default Time To Live (TTL) for locally generated IP
packets. This parameter determines the number of hop counts the IP
packet may pass before it is dropped.
By limiting the TTL, continuous circulation of IP packets on the
network without ever reaching a destination is avoided.
The default is 64.
OPTIONAL
defragmode Disallow (disabled) or allow (enabled) defragmenting IP fragments.
The default is enabled.
OPTIONAL