Filter
Top Products
E-DOC-CTC-20061027-0003 v2.0
IPQoS Commands
482
ipqos queue config
Modify the IPQoS subqueue configuration.
SYNTAX:
where:
ipqos queue config dest = <string>
queue = <number{0-5}>
[propagate = <{disabled | enabled}>]
[ecnmarking = <{disabled | enabled}>]
[ackfiltering = <{disabled | enabled}>]
[maxpackets = <number{0-250}>]
[maxbytes = <number{0-128}>]
[respackets = <number{0-250}>]
[resbytes = <number{0-128}>]
[hold = <number>]
[markprob = <number{1-1000}>]
dest The destination interface for the IPQoS queues instantiation.
Typically, an ATM phonebook entry.
REQUIRED
queue A number between 0 and 5.
Represents the number of the queue, where:
> 5 is the Real time queue
> 4 is the Assured Forwarding (AF) queue 4
> 3 is the AF queue 3
> 2 is the AF queue 2
> 1 is the AF queue 1
> 0 is the Best Effort queue.
OPTIONAL
propagate Higher priority packets will be queued in a lower priority queue,
instead of being dropped, as soon as the destination queue is in
overflow state.
The packet will be put in a lower priority queue only once.
Choose between disabled or enabled.
The default is disabled.
Note The propagate flag for the lowest priority subqueue (the Best
Effort queue) has no meaning.
OPTIONAL
ecnmarking Enable Explicit Congestion Notification (ECN) for IP packets in this
subqueue (enabled) or not (disabled).
The default is disabled.
OPTIONAL
ackfiltering Enable filtering of TCP ACK packets (enabled) or not (disabled).
The default is disabled.
OPTIONAL
maxpackets A number between 0 and 250.
Represents the maximum number of packets in this queue.
The default is 0 for the Real time queue and 100 for the other queues.
Note 0 means that a maximum size is not enforced.
OPTIONAL