Filter
Top Products
6
V. Setting the T100
Programming Outline
The following is a reference list of the programming order and defaults.
Reminder: Pressing <AM IN> allows you to skip unnecessary steps. The
numbers below match the numbers of the detail programming steps:
Enter programming mode
1. Set pay period and current print line (Default: Weekly)
2. Set time (Default: Eastern Standard Time)
3. Set year, month and date (Default: Eastern Standard Time)
4. Set 12 or 24 hour print format (Default: 12 hour)
5. Set minutes to 60 minute or decimal hundredths (Default: 60 minute)
6. Set the day change time (Default: Midnight)
7. Set Time Zone (Default: Eastern Standard Time)
8. Daylight Saving Time (Default: On)
9. Input default password (Default: 1234)
10. Set 2 color (red/black) printing (Default: N/A, set as desired)
11. Set signal tone times (Default: N/A, set as desired)
12. Set signal tone duration time (Default: 5 seconds)
13. Change default password (Default: 1234, change as desired)
Exit programming mode
If you do not need to change any of the default settings you may proceed to
“Operating the T100” on page 17.