Filter
Top Products
3-16
Chapter 3: SYSTEM SETTINGS (NX-100 SETUP PROGRAM)
6.3. Network Setting
Step 1. Click on the [Network] tab of the System Setting Tool.
The setting screen will be displayed.
Step 2. Set each item.
(1) IP address
Enter the unit's IP address. After the IP address is set with the Unit Scanning Tool, the assigned IP
address is indicated when the unit setting file is loaded into the PC.
(2) TCP port number assignment
Designate the web server port number and the base number of the other TCP port. The port number can
be set within the range of 1 – 65535.
[Web server]
Enter the web server port number. Its default is "80."