Filter
Top Products
3-30
Chapter 3: SYSTEM SETTINGS (NX-100 SETUP PROGRAM)
6.10. Reopening Unit Setting Files
Reopen the saved unit setting files.
The program automatically reads the saved unit setting files at the time of program activation. Whenever a file
has not yet been saved after edit completion, its contents can be reverted back to the previous settings.
Select [File] → [Reopen file].
6.11. Downloading the Operation Logs
Download all NX-100's and NX-100S' operation logs programmed into the system and save them to a
specified location*.
* The data folder is located in the installation folder (Default path: C:\Program Files\TOA\NX-100) of the setup
program. The save location cannot be manually designated.
Select [File] → [Log file download].
6.12. Uploading Unit Setting Files
Upload the currently opened setting file to the NX-100 and NX-100S.
Step 1. Click on the toolbar Save button or select [File] → [Save to file].
The setting file will be saved.
Step 2. Click on the Upload button or select [Setting] → [Upload].
Note
Setting file upload takes some time. Take care to never switch off the unit's power during the upload. (The
Status indicators on the NX-100's and NX-100S' front panels flash during the upload.)
6.13. Downloading Unit Setting Files
Read the currently-connected NX-100's and NX-100S' setting contents into the System Setting Tool.
Click on the Download button or select [Setting] → [Download].
Programmed setting data of the units connected to the system will be displayed.
6.14. Updating Firmware
Update the firmware of all NX-100 and NX-100S units programmed into the system.
Step 1. Select [Setting] → [Firmware update].
Step 2. Select firmware file.
Firmware will be written into all connected NX-100 and NX-100S units.
Note
Take care to never turn off or reset the unit's power during firmware update. (The Status indicator on each
unit's front panel flashes during the update.)
[Update information]
• The latest versions of the following software and manuals are open to the public on the TOA's download site
http://www.toa-products.com/international/: NX-100 firmware, NX-100 software (Setup program and
Operation program), and Instruction manuals (Installation setup manual and Operations manual).
Please download them from the above web site.
• The version of each instruction manual is in the lower right corner on the last page expressed in a year-
month format. Example: "200406" represents 2004, June.