Filter
Top Products
57
Getting Started
Setting up other devices
5.375 x 8.375 ver 2.1.2
Setting up other devices
Installing additional memory (optional)
Your computer comes with enough memory to run most of
today’s popular applications. You may want to increase the
computer’s memory if you use complex software or process
large amounts of data.
Your computer is equipped with two memory slots, which are
available for you to add additional memory modules of either
128, 256, and 512 MB capacity.
You need a standard Phillips no. 1 screwdriver to install a
memory module.
CAUTION: To avoid damaging the computer’s screws, use a
standard Phillips no. 1 screwdriver that is in good condition.
If the computer is on, begin at step 1; otherwise, skip to
step 4.
1 If the computer is on, click Start, Turn Off Computer.
The Turn off computer window appears.
2 Click Turn Off.
The operating system turns off the computer.
3 Unplug and remove any cables connected to the
computer.
4 Remove the battery. For steps on removing the battery,
see “Changing the main battery” on page 114.