Filter
Top Products
95
Learning the Basics
Setting up for communications
5.375 x 8.375 ver 2.1.2
Connecting the modem
Your computer comes with a built-in V.90 56K modem and a
built-in 10/100 Ethernet LAN adapter. To use the modem,
you must connect it to a standard voice-grade RJ11 telephone
line.
NOTE: Due to FCC limitations, speeds of 53 kbps are the
maximum permissible rates during downloads. Actual data
transmission speeds will vary depending on line conditions.
1 Attach one end of a standard RJ11 telephone cable to the
modem port on the back of the computer.
Connecting the internal modem
2 Plug the other end of the RJ11 telephone cable into the
modular jack of a standard voice-grade telephone line.
Connecting your computer to a network
You can connect your computer to a network locally or
remotely.
❖ Locally, using the built-in 10/100 Ethernet LAN adapter
by connecting it to a standard RJ45 LAN line.