Toshiba 232 All in One Printer User Manual


 
150
5.USING THE EDITING FUNCTIONS
7.EDITING (Cont.)
5
6
Enter the values read in step 5 for the specified area, and then press
the [SET] button. Set 4 values in order.
After the setting of 4 values is finished, the next edit area menu is displayed. Repeat steps 5 and 6 when you
specify other areas. Up to 4 areas can be specified on an original.
To correct the value which has been set, press the [RESET] button. Pressing it once makes the highlighted
field move one position upward. Highlight the field in which you want to rectify the value, and then key in the
correct one.
7
Press the [ENTER] button after specifying the area.
4
Place the original with its face up on the
original glass.
Set the original with its face up and bottom toward you and fit its
top left corner against that of the original glass to align it with the
original scales.
Do not place heavy objects (9 lb. or more) on the original glass and
do not press on it with force. Breaking the glass could injure you.
5
Specify the area. Read the following 4
values of the left and top scales.
X1: Distance from the top left to the left edge of the
specified area
X2: Distance from the top left to the right edge of the
specified area
Y1: Distance from the top left to the upper edge of the
specified area
Y2: Distance from the top left to the lower edge of the
specified area
The marks of the original scale have a 2 mm (0.08") pitch.