Toshiba 232 All in One Printer User Manual


 
49
1
5
While pushing the green lever of the side
guide in the direction of the arrow, set
the side guide to the desired paper size.
Adjust the side guides with both hands.
6
Push the arrow part (left side) to lock the
side guide.
7
Place paper in the drawer(s).
Place paper with its copy side up. (The copy side may be
described on the wrapping paper.)
For the maximum number of sheets that can be set, see P.46
“Acceptable copy paper”.
Fan the paper well before placing it in the drawer.
Be sure that the paper height does not exceed the line indicated
inside of the guide.
Do not use creased, folded, wrinkled or damp sheets of paper.
Make sure that a gap of 0.02" (0.04" or less in total) is left between
the paper and the side guide for plain paper, and approx. 0.02" to
0.04" (approx. 0.04" to 0.08" in total) for thick paper. If the gap is
insufficient, it could cause paper misfeeding.
A