Filter
Top Products
65
2
2. Making Copies
Initial (Default) settings
When the power is turned on, when the energy saving mode is cleared, and when the [FUNCTION
CLEAR] button on the control panel is pressed, various setting items are automatically set. These items
are called the initial (default) settings. Set originals after placing paper or confirming that there is paper in
the drawers. When the [START] button on the control panel is pressed with any of the settings unchanged,
copies are made in the initial (default) settings. You can make copies as desired by setting various copy
modes.
The table below lists the various items of the initial settings at the time of installation of this equipment.
• These initial settings can be changed as desired. See the User Functions Guide for details.
Item Initial (Default) setting
Reproduction ratio 100%
Copy quantity 1
Paper selection Automatic Paper Selection (APS)
Original -> Copy 1-Sided -> 1-Sided
Density adjustment Automatic copy density adjustment
Original mode TEXT/PHOTO
Finishing mode Placing originals on the original glass: Non-sort/
Non-staple mode
Placing originals on the Reversing Automatic Doc-
ument Feeder (optional): Sort mode
Feeding mode when originals are placed on the
Reversing Automatic Document Feeder (optional)
Continuous feed mode