Toshiba 282 All in One Printer User Manual


 
107
3
Staple sort mode
When the Finisher (optional) is installed, automatic stapling is enabled. You can select the stapling position
from three types.
The paper quantity and weight applicable for this mode differ depending on the Finisher installed in this
equipment. See P.108 “Maximum number of sheets for stapling”.
Special paper such as OHP films or sticker label cannot be used for stapling.
Only copies of the same width can be stapled. (e.g. LT and LD or LT-R and LG)
(Example of selecting the [FRONT STAPLE SORT] button)
1
Place paper in the drawer(s).
When using this mode in bypass copying, specify the paper size in advance. ( P.73 “3.Bypass Copying”)
2
Place the original(s).
3
Press the finisher button on the basic menu.