Filter
Top Products
54
1.BEFORE USING EQUIPMENT
4.Setting Copy Paper (Cont.)
1
Drawer for special uses
When you set paper for special uses other than normal copying (e.g. sheets for cover copying) in the
drawer, you need to set this drawer for the special use in advance. If the drawer has been set for a special
use, its indication will change on the touch panel. A drawer with this setting will not be used for normal
copying.
The following paper types are selectable according to each purpose.
Setting the drawer for special uses
1
Place paper in the drawer(s).
• Place paper with its copy side up.
• Set the paper size as required. ( P.52 “Changing the setting of paper size”)
Paper type Purpose Indication Reference
Cover sheet Sheet used in the cover copying mode “COVER” P.156 “9.COVER
SHEET”
Insertion
sheet
Sheet used in the sheet insertion mode
(Up to 2 drawers can be set for this mode.
First, set Insert source 1, then press the
drawer for the paper type of Insert source 2,
and then press the [INSERT] button.)
“INSERT 1”
(or “INSERT 2”)
P.159 “10.SHEET
INSERTION”
FAX paper Fax paper (Fax Unit (optional) is required for
the Fax function.)
F (See the manual of
each option.)
Special paper Special types of paper
(e.g. Paper with a watermark)
-
Thick 1 Sheet used when its weight is between 21 lb.
and 28 lb. Bond. It can be set with other paper
types.
P.46 “Acceptable
copy paper”
2
Press the [USER FUNCTIONS] button on
the control panel.