Filter
Top Products
43
1
3. Energy Saving Mode
This equipment supports three energy saving modes; the Automatic Energy Save mode, the Off mode and
the Sleep Mode.
Automatic Energy Save Mode
The equipment enters the Automatic Energy Save mode automatically after a specified period of time
*1
since its last use. During this mode, "Saving energy - Press START button" appears on the touch panel.
Off Mode
The equipment enters the Off mode automatically after a specified period of time
*1
since its last use. The
equipment is automatically shut down and the power switch is turned off.
• This mode is applied only to the copier model.
• Turn the power switch on again to use the copier.
Sleep Mode
The equipment enters the Sleep Mode automatically after a specified period of time
*1
since its last use.
During this mode, the message of the Automatic Energy Save mode disappears and the [ENERGY
SAVER / SHUTDOWN] button lights in green.
• This mode is applied to the multifunction model with any of the FAX Unit, Printer/Scanner Kit and
Scanner Kit (all optional) installed.
• This mode is automatically cleared upon the reception of print data, Fax data, Internet Fax data or E-
mails. It is also cleared by pressing the [START] button.
*1 This period is set at 3 minutes by factory default.
See the User Functions Guide to change the default settings noted above.
If ‘Automatic Energy Save’ and ‘Off Mode’/’Sleep Mode’ have the same setting time, ‘Off Mode’/’Sleep
Mode’ takes priority.
The equipment can also be made to enter the sleep mode manually by means of the following procedure.
1
Press the [ENERGY SAVER] button on
the control panel.