Filter
Top Products
282
9.BLINKING GRAPHIC SYMBOLS
9
4. Jam Symbols
When a paper misfeed occurs in the equipment, the jam symbol blinks in the positions where the paper is
misfed. Follow the guidance on the touch panel to remove the misfed paper properly.
• The misfed paper may not be in the correct position as shown in the illustration depending on the tim-
ing of the misfeeding. If the jam symbol keeps blinking, though the misfed paper has been removed,
perform all the operations given in the guidance.
1. Reversing Automatic Document Feeder (optional) ( P.282)
2. Fuser Unit ( P.289)
3. Automatic Duplexer ( P.287)
4. Bypass tray ( P.287)
5. Drawer feeding area ( P.285)
6. Large Capacity Feeder (optional) ( P.286)
7. Jam releasing cover ( P.288)
8. Bridge Unit (optional) ( P.292)
9. Saddle Stitch Unit of Saddle Stitch Finisher (optional) ( P.296)
10. Hole Punch Unit (optional) ( P.293)
11. Finisher (optional) ( P.294)
12. Hanging Finisher (optional) ( P.295)
13. Staple Unit (optional) ( P.296)
Releasing a paper misfeed in the Reversing Automatic Document Feeder (optional)
1
Raise the lever, and then open the upper
cover.
1 42 3
79 8 5610,11,12,13