Toshiba 305 All in One Printer User Manual


 
8 WHEN SOMETHING IS WRONG WITH THE EQUIPMENT
122 Regular Maintenance
Regular Maintenance
We recommend that you clean the following portions weekly so that the originals can always be scanned in unsoiled
conditions.
y Be careful not to scratch the portions when cleaning them.
y When cleaning the surface of the equipment, do not use such organic solvents as thinner or benzine.
- This could warp the shape of the surface or leave it discolored.
- When using a chemical cleaning pad to clean it, follow the instructions.
1. Scanning area (surface of the long rectangular glass)
Wipe it with a soft dry cloth. If there are still stains remaining, wipe clean with a piece of soft cloth which has been
moistened with water and then squeezed well. Do not use liquids other than water (such as alcohol, organic solvents
or neutral detergent).
2. Original glass
Wipe it with a soft dry cloth. If there are still stains remaining, wipe clean with a piece of soft cloth which has been
moistened with water and then squeezed well. Do not use liquids other than water (such as alcohol, organic solvents
or neutral detergent).
3. Guide
Clean the surface as follows depending on the extent of the staining.
- Clean it with a soft cloth.
- Clean it with a soft cloth lightly moistened with water.
- Clean it with a soft cloth lightly moistened with alcohol, and then wipe with a dry cloth.
- Clean it with a soft cloth lightly moistened with watered-down neutral detergent, wipe with a cloth moistened with
water, and then wipe with a dry cloth.
4. Platen sheet
Clean the surface as follows depending on the extent of the staining.
- Clean it with a soft cloth.
- Clean it with a soft cloth lightly moistened with water.
- Clean it with a soft cloth lightly moistened with alcohol, and then wipe with a dry cloth.
- Clean it with a soft cloth lightly moistened with watered-down neutral detergent, wipe with a cloth moistened with
water, and then wipe with a dry cloth.
1
2
3
4