Filter
Top Products
How to Perform Internet Fax 105
3
Specify the following items as you require and press the [Next] but-
ton.
y RESOLUTION
Select the resolution before you scan the original to be sent.
When sending Internet Fax destination only, the [FINE] resolution will be applied even if
you select [U-FINE].
y MODE
Set the image quality mode before you scan the original to be sent.
[TEXT] — Press this when scanning the originals that contain texts.
[TEXT/PHOTO] — Press this when scanning originals that contain texts and photos.
[PHOTO] — Press this when scanning originals that contain photos printed on
photographic paper.
The transmission time may be longer than usual in case the PHOTO/TEXT or the
PHOTO mode is selected.
y EXPOSURE
Set the image density according to the contrast of the original to be sent.
In the automatic exposure mode, the copier automatically judges the contrast of the
original, and selects the optimum contrast.
In the manual exposure mode, you can adjust the contrast manually in 11 steps.
y TX TYPE
When sending Internet Fax, you can only select the [MEMORY TX] button.
y ORIGINAL
Select the button of the original size, or select the [AUTO] button to automatically detects
the original size.
When placing the different width originals, select the [DIFFERENT WIDTH] button.
For the Internet Fax, LT or LG size originals are sent in the same size as the originals.
Originals larger than those sizes are reduced to LT to be sent. Originals smaller than
those sizes are sent in LT without being enlarged.