Filter
Top Products
13
When Using the Multifunctional Digital Colour Systems
Warning
- DO NOT place metallic objects or containers with water (flower vases, coffee cups, etc.) on or near the
multifunctional digital colour systems. And keep paper clips and staples away from the air vent. This could
cause a fire or give you an electric shock.
- If the multifunctional digital colour systems becomes excessively hot, smoke comes out of it or there is
an odd smell or noise, proceed as follows.
Turn the main switch OFF and remove the plug from the outlet, then contact your service representative.
- If the multifunctional digital colour systems will not be used for more than one month, remove the plug
from the outlet for safety purposes during that time.
This could cause a fire or give you an electric shock if an insulation failure occurs.
Caution
- DO NOT place heavy objects (4 kg or more) on the original glass and do not press on it with force.
Breaking the glass could cause personal injury.
- DO NOT place heavy objects (4 kg or more) on the multifunctional digital colour systems. If the objects
fall off, this could cause injury.
- DO NOT remove or connect the plug with wet hands, as this could give you an electric shock.
- DO NOT touch the fuser unit and the metal area around it. Since they are very hot, you could be burned
or the shock could cause you to get your hand injured in the machine.
- When changing the angle of the control panel, be careful not to let your hands be caught in the gap
between the equipment and the control panel. This could cause personal injury.
- DO NOT place 3 kg or more of objects on an optional work table. Breaking the work table could cause
personal injury.
1: Warning for high temperature areas (Ventilation holes)
2: Warning for high temperature areas (Fuser unit) - The labels are attached on 3 places.
3: Warning for handling Transfer belt
2
3
1
4
5