Filter
Top Products
84
3.SETTING OF BASIC COPY MODES
4.SELECTING FINISHING MODES (Cont.)
3
2
Set the paper size.
- For drawer feeding "Manual Paper Selection" Page 68, step 3
- For bypass feeding "Bypass Copying on Standard Size Paper"
Page 59, step 4
3
Place the original(s).
- "2.SETTING ORIGINALS" Page 45
- When placing originals in the reversing automatic document
feeder (optional), set them by referring to the order of previous
pages in the illustrations.
- When placing them on the glass, place the first page of the
originals first if the [MAGAZINE SORT] or the [MAGAZINE SORT
& SADDLE STITCH] is selected. If the [SADDLE STITCH] is
selected, set them in the order of pages 12-1, (2-11), 10-3 (4-9),
then 8-5, (6-7) by referring to the illustration above as an example.
4
Press the Finisher button on the basic
menu as shown in the illustration on the
right (highlighted).
5
Press the [MAGAZINE SORT] (or
[MAGAZINE SORT & SADDLE STITCH] or
[SADDLE STITCH]) button.
When the saddle stitch mode is used for A3, B4 and LD size, that is,
when the [MAGAZINE SORT & SADDLE STITCH] button or the
[SADDLE STITCH] button is selected, raise the stopper of the
saddle stitch tray.
z Select other copy modes as required.
6
Press the [START] button.
- When placing original(s) on the glass, follow steps 5 to 6 on page
"When Coming Across the Situations below" Page 54.