Filter
Top Products
TOSHIBA 6F3A4508
- 22 -
Figure 6.4.1 Set Point Control
The set points in the drive equipment are processed together.
The set points in the drive equipment are in internal RAM.
The internal RAM is saved in EEPROM because it is erased when the power is turned off.
(Normally EEPROM0 is used.)
When the drive equipment power is turned on, the set points in EEPROM are copied to internal
RAM.
When a value in internal RAM is changed (when set point is rewritten or the set point file is
written in the drive equipment), the data in internal RAM must be transferred to EEPROM.