Filter
Top Products
TOSHIBA 6F3A4508
- 7 -
The following window appears when Wi Tool is started.
Figure 3.2 Logon window
Enter the User Name and Access Level and then click OK.
A password input window appears when connecting to the drive equipment.
Figure 3.3 Password prompt
Enter the password and click OK.
<<User Name, Access Level, Password>>
The name of the operator allowed to connect to the drive equipment, access level of the
operator, and the password for that operator are registered in each drive equipment.
This operator name is referred to as the User Name.
The access level is divided into ten levels from 0 (Read Only) to 9 (Full Access).
If the User Name and Access Level do not match those registered in the drive equipment, the
drive equipment returns access level 0.
The User Name and Password are set to "TOSHIBA" at factory shipment.
Access level 9 is allowed with this user name.
This User Name and Access Level are entered when starting Wi Tool and are used to
connect to the drive equipment.