Filter
Top Products
TOSHIBA 6F3A4508
- 24 -
These functions are described below.
1) Display set points in drive equipment internal RAM
Click the Data Display button (1).
Set point data is read from the drive equipment and displayed as follows:
Figure 6.4.3 RAM display
In Wi Tool, some representative set points are maintained as template and the actual set points
of the drive equipment are referenced as the difference from the number of this template and
the template.
In the above example, the template number is 0 and the values different from this template
appear below.
You can print this data by clicking Print.
2) Display set points in drive equipment EEPROM
Click the Data Display button (2).
Set point data is read from the drive equipment and displayed.
3) Display set point file
Click the Select File button (3).
Select a set point file and then click Show File Data below button (3).
The content of the file is displayed.