Filter
Top Products
Tests and Diagnostics
PORTEGE M780 Maintenance Manual (960-809) [CONFIDENTIAL] 3-129
3.34.7.2 HDD Logical Test
1) Test content
This test first verifies that the files which exist on the drive recognized as the built-in HDD
are read normally.
During the verification operation, the status update is performed sequentially (display of file
names in File Name) and when the verification reaches the last file, it is terminated.
In addition, reading of a file reads 1MB of area from a head. If 1MB of the area reads
without a problem and is made, it will be judged as O.K.
■ Simple Mode
This test mode performs the read test to the first 400 files on the drive.
■Detail Mode
About a setup of 1PASS Count
A Detail test mode specifies the number of times of a test by "1 PASS Count" box of a
detailed setting screen. When the number of files of HDD is below a default value at this
time, and the reading test of all the PATH files of HDD is completed, it judges with 1PASS.
A default preset value tests by reading from a head to 2000 files.
About Folder PASH
Only PATH specified by the folder tree of the Detail setting screen is tested. Only the folder
of the root class of each drive can be specified. Moreover, although the file to a root class is
not displayed on a folder tree, it tests. Moreover, although the file to a root class is not
displayed on a folder tree, it tests. It will be referred to as "1PASS" if the reading test of all
the specified PATH files is completed.
2) Test screen
▼ File Name: Displays the name of the file being verified with full path.