Filter
Top Products
4 Replacement Procedures 4.11 Memory module (slot A)
4.11 Memory module (slot A)
CAUTION: The power must be turned off when you remove the memory module.
Removing the memory module with the power on risks damaging the module
or the computer itself.
Do not touch the memory module terminals. Any dirt on the terminals may
cause memory access problems.
Never press hard or bend the memory module.
Removing the memory module
To remove the memory module, make sure the computer is in boot mode and powered off.
Then perform the following procedure. (See Figure 4-18 and 4-19.)
1. Remove the following screws and memory slot cover.
M2.53.0C S-THIN HEAD screw 2
M2.5x3.0C S-THIN HEAD
Memory slot cover
Figure 4-18 Removing the memory slot cover (slot A)
4-32 [CONFIDENTIAL] PORTÉGÉ M780 Maintenance Manual (960-809)