Filter
Top Products
4 Replacement Procedures 4.28 Touch pad
4.28 Touch pad
Removing the Touch pad
The following describes the procedure for removing the touch pad. (See Figure 4-44 to 4-46.)
1. Peel off the glass tapes.
2. Disconnect the relay cable from the connector on the touch pad.
3. Remove the following screw and touch pad assembly.
M2.54.0B FLAT HEAD screw 1
M2.5
4.0B FLAT HEAD
Glass tape
Connector
Relay cable
Touch pad assembly
Guide
Glass tape
Figure 4-44 Removing the touch pad (1)
4-70 [CONFIDENTIAL] PORTÉGÉ M780 Maintenance Manual (960-809)