Filter
Top Products
10
Setting up your computer and getting started
RG 5.375 x 8.375 ver 2.3.4
6 Lift (but do not detach) the plastic sheet to expose the memory slots.
Lifting the plastic covering the memory slots
7 Remove the new memory module from its antistatic packaging.
Static electricity can damage the memory module. Before you handle the
module, touch a grounded metal surface to discharge any static electricity
you may have built up.
To avoid damaging the memory module, be careful not to touch its pin
connector (on the side you insert into the computer).
Avoid touching the connectors on the memory module or on the computer.
Grease or dust on the connectors may cause memory access problems.
8 Insert the memory module in a slot and gently press it down into
place.
Inserting the memory module
The clips on either side of the module will click to secure the module.
9 Cover the slots with the plastic sheet.
10 Replace the keyboard.
To secure the keyboard, fit the tabs at the bottom of the keyboard into
the corresponding slots at the top of the computer’s palm rest.
11 Fasten the keyboard with the keyboard retaining brace and screws.