Filter
Top Products
15
Learning the basics
RG 5.375 x 8.375 ver 2.3.4
Inserting an SD card
MMC cards (multimedia cards) do not work in this slot.
1 Turn the card so that the metal contacts are face down.
2 Push the card into the slot until it locks in place.
Inserting an SD card
Removing an SD card
1 Click the Safely Remove Hardware icon on the System tray.
2 Click Safely remove xxxx, where xxxx is the identifier for your SD
card.
3 Press the card inward to release it.
The card pops out slightly.
4 Lift the side of the computer where the card is located, grasp the card,
and pull it straight out.
Learning the basics
Computing tips
❖ Save your work frequently.
Your work stays in the computer’s temporary memory until you save it
to the disk. You will lose all unsaved work, if, for example, a system
error occurs and you must restart your computer, or your battery runs
out of charge while you are working. Your computer can be
configured to warn you when the battery is running low.
HINT: Some programs have an automatic save feature that you can turn on.
This feature saves your file to the hard disk at preset intervals. See your
software documentation for details.
❖ Back up your files to diskettes (or other removable storage media) on
a regular basis. Label the backup copies clearly and store them in a
safe place.