Filter
Top Products
User’s Manual 9-15
A300
eSATA/USB combo port
Refer also to your eSATA device and USB device’s documentation.
External devices
connected to the
compatible ports do
not work when
connected to a
compatible port
Some external devices may not work when
connected to a compatible port when the USB
Sleep and Charge function is [Enabled] in the
HW Setup.
Reconnect the external device after turning ON
the computer.
If the external device still does not work, connect
device to an USB port that does not have the
USB Sleep and Charge function-compatible icon
( ) or change the USB Sleep and Charge
function setting to [Disabled] in the HW Setup.
The USB WakeUp
function does not work
When USB Sleep and Charge function is set to
[Enabled] in the HW Setup, the USB WakeUp
function does not work for ports that support the
USB Sleep and Charge function. In that case,
use an USB port that does not have the USB
Sleep and Charge function-compatible icon ( )
or change the USB Sleep and Charge function
setting to [Disabled ] in the HW Setup.
Problem Procedure
Problem Procedure
e/SATA device or USB
device does not work
Check for a firm cable connection between the
eSATA/USB combo port on the computer and the
eSATA device or USB device.
Make sure the eSATA device or USB device
drivers are properly installed. Refer to your
Windows documentation for information on
checking the drivers.
If you are using an operating system that does
not support USB, you can still use a USB mouse
and/or USB keyboard. If these devices do not
work, make sure the USB KB/Mouse Legacy
Emulation item in HW Setup is set to [Enabled].
If problems persist, contact your dealer.